Electromechanical locks

Cabinet locks can be used instead of the mechanical locks commonly used until now, or as an additional electric access control. Installation can be performed from the side or from the front, thus flexible for any installation situation. It does not matter if drawers or doors are to be locked.

Model with basic equipment.

• Radius keeper, FaFix^®, adjustable by 3 mm
• Universal voltage
• Connection available to order as a connectible/pluggable option
• Compatible with current mortise locks
• Compatible with available striking plates
• Symmetrical design. DIN left/right as well as horizontal applicable

Model with basic equipment.

• Radius keeper, FaFix^®, adjustable by 3 mm
• Compatible with current mortise locks
• Compatible with available striking plates
• Symmetrical design. DIN left/right as well as horizontal applicable

• Not an authorised locking system for doors along escape and rescue routes

The electronic swing door strike 351M.80 is equipped with an innovative quiet electric motor drive and is designed for the locking of swing, double swing, and carousel doors. It is suitable for horizontal or vertical installation in the door frame.

The door contact and the armature contact are designed as potential-free switching contacts. The door contact is switched magnetically when the door is closed. The armature contact can be used to monitor locking status.

The 351M.80 swing door electric strike works according to the fail-safe unlocked operating principle. If the power is shut off or the power fails, the door can be opened. If power is connected and the door is in the "Door closed" position for at least 1 s

• Very quiet locking and unlocking, silent during permanent release
• Suitable e.g. for double-action swing doors and single-action swing doors, interlocking doors and special doors
• Suitable as a supplementary locking system for installation in fire doors
• Vertical and horizontal universal installation position in the door frame or in the door leaf
• Holding force of 5000 N
• Safe unlocking under pre-load of up to 5000 N
• 12V DC to 48V DC multi-voltage, controlled DC voltage
• Monitoring contact and armature contact integrated
• Compatible with Model 351U

• Suitable for fire doors according to British Standard BS476

Version with magnet bolt counterpart, with fail-unlocked strike 138TQ53

• Latch insertion on the door frame removed
• Visually attractive, concealed installation, magnet bolt is retracted when door open
• Low opening force due to weak latch bolt spring
• No closing force due to magnet bolt
• Quiet locking and unlocking
• The supplementary locking system 9338 is designed as a supplementary locking system for versatile applications for the locking of doors
• Example for other usage options: Office doors, laboratory doors, interlocks, wet cells in hospitals, special doors
• Universal installation position, vertical and horizontal
• Compatible with model 9334
• Load cycles for factory test: 1,000,000

• Delivery as a complete set with striking plate or as a set without striking plate

When the door is closed, the keep with fixing plate holds the door leaf in place at the same time.

The door must have a stop for the door leaf or be actuated by a door closer with adjustable closing force. In the case of two-leaf glass doors, a strike must be integrated at the top in the door frame for each leaf (not suitable for swing doors).

Models 914 and 914ZY are fastened with a securing pin to ensure that the strike latch is not locked unintentionally when the door is open.

The adjustable keep enables exact adjustment of the glass door strike to suit the glass thickness involved.

• Vertical and horizontal mounting possible
• DIN left and right usable
• Fail-locked and fail-unlocked version
• With 12/24 V changeover switch including TVS diode (e.g. to combine with access control systems)
• Adjustment to glass leaf thickness
• Model 914U with securing pin against unintentional locking of the door strike latch

The next generation in the Lockwood Panic Exit Device range, the FLUID Series provides for the fundamental means of escape whilst offering a completely unique locking mechanism and design aesthetic. With this type of unique innovation, ASSA ABLOY continues to evolve in standardising the market. The Lockwood FLUID Exit Device range combines ergonomics and performance with a completely new type of axis mechanism and high security bolt system.

• Brushed Stainless Steel Bolt
• High level of resistance. Up to 500kg to each latching point.
• Tested to 1,000,000 cycles
• Auxiliary bolt activation from 1mm
• Effortless opening < 20N required
• Available in both vertical and horizontal latching positions in 2/3 point configurations
• Bar can be cut down to 350mm
• New fixing bracket and template design reduces installation time by up to 50%
• Protect. Evacuating people safely
• Secure. High vandal resistance
• Optimise. A simple and efficient installation process

• Successfully tested on fire door assemblies in accordance with Australian Standard AS1905.1-2005. Fire Resistant Doorsets.
• Conforms to the standards as setout in CE EN1125 -2008.

The Cylinder Dogging device is a simple mechanism designed to hold the push bar in the open position. Ideal for applications where access to the premises can be selected at any time and providing for a common thorough fare door. The Cylinder Dogging device can be ordered inclusive with the FLUID Exit Device or can be supplied as an optional accessory.

With the innovative locking mechanism integral to the FLUID Exit range, the latches are always retained behind their strike plate providing a positive latched state to the door as all times. The Cylinder Dogging option will not change the state of latch and for this reason, we are able to provide this option as successfully tested on fire doors for the first time.

*FLUID Exit Device can be ordered with Cylinder Dogging as standard. See Part Numbering guide.

Field Reversible
*Euro Half Cyl sold separately

The FLUID External Lever Trim provides for access externally as required by use of key to lock and unlock the lever handle.

Euro Profile Half Cylinder is required (not supplied).

Available in SILVER only. (Black & White finishes available on request)

The next generation in the Lockwood Panic Exit Device range, the FLUID Series provides for the fundamental means of escape whilst offering a completely unique locking mechanism and design aesthetic. With this type of unique innovation, ASSA ABLOY continues to evolve in standardising the market. The Lockwood FLUID Exit Device range combines ergonomics and performance with a completely new type of axis mechanism and high security bolt system.

• Brushed Stainless Steel Bolt
• High level of resistance. Up to 500kg to each latching point.
• Tested to 1,000,000 cycles
• Auxiliary bolt activation from 1mm
• Effortless opening < 20N required
• Available in both vertical and horizontal latching positions in 2/3 point configurations
• Bar can be cut down to 350mm
• New fixing bracket and template design reduces installation time by up to 50%
• Protect. Evacuating people safely
• Secure. High vandal resistance
• Optimise. A simple and efficient installation process

• Successfully tested on fire door assemblies in accordance with Australian Standard AS1905.1-2005. Fire Resistant Doorsets.
• Conforms to the standards as setout in CE EN1125 -2008.

The Cylinder Dogging device is a simple mechanism designed to hold the push bar in the open position. Ideal for applications where access to the premises can be selected at any time and providing for a common thorough fare door. The Cylinder Dogging device can be ordered inclusive with the FLUID Exit Device or can be supplied as an optional accessory.

With the innovative locking mechanism integral to the FLUID Exit range, the latches are always retained behind their strike plate providing a positive latched state to the door as all times. The Cylinder Dogging option will not change the state of latch and for this reason, we are able to provide this option as successfully tested on fire doors for the first time.

*FLUID Exit Device can be ordered with Cylinder Dogging as standard. See Part Numbering guide.

Field Reversible
*Euro Half Cyl sold separately

For doors exceeding 2300mm in height, the FE0050SIL - Vertical Rod Extension Kit is designed as an addition to the vertical rod exit device and can be used in applications of up to 3000mm. To be ordered separately.

*when using an extension kit, please note that rod covers are not available for this kit.

Available in SILVER only. (Black & White finishes available on request)

The FLUID External Lever Trim provides for access externally as required by use of key to lock and unlock the lever handle.

Euro Profile Half Cylinder is required (not supplied).

Available in SILVER only. (Black & White finishes available on request)