Mechanical Products

Cylinders, in cooperation with mortise locks, define the level of security of protected premises. The use of an appropriate cylinders affects the fluent and reliable operation of a mortise lock. The size of a cylinder consists of 2 elements, for example 30/30. It means that the distance between the face of the cylinder and the middle of the mounting screw hole is 30 mm and the distance between the middle of the mounting screw hole and the second face is also 30 mm.

A mortise lock represents the essential hardware for any type of door. These locks are manufactured in different sizes, with versions for cylinder, deadbolt or keyless (bathroom) inserts. LOB products includes adaptable (universal) locks, where the operating direction can be quickly changed from right to left and vice versa, without needing to remove the lock body. The change of direction of operation is achieved by withdrawing the latch and turning it by 180 degrees.

Padlocks are commonly used security devices. Thanks to a wide range of sizes and types, they are suitable for a wide scope of applications. When choosing a padlock one must also consider the conditions in which it is going to operate. The LOB product range includes padlocks suitable for operation in variable atmospheric conditions. Such padlocks are equipped with appropriately installed seals that protect the mechanism against moisture.

Cam locks are designed for various types of cases, furniture, cupboards, containers, etc. The key element here is the diameter of the hole for the installation and clamping of the lock with a mounting ring and the length of the cam (lock). The length of the cam (lock) is important, because it blocks the door/cover and must have enough space for operation. Locks with additional vertical locking, with casement bolts/tendons are also available. These locks are designed mainly for mounting on cupboard doors.

We offer rim locks in several different size variants. When buying these locks one must bear in mind the distance between the mounting screws and the distance between the insert/knob from the face of lock, which should be mounted flush with the door edge. We offer locks manufactured according to two standards: 50 mm and 60 mm for single-bolt locks.