Exidor 325 lever outside access device - with cylinder

The Exidor 302 is supplied with 3 keys and has the advantage that a master keyed 40mm oval or euro profile cylinder can be used. Fire rated for use on timber and steel doors. Supplied as standard for doors up to 45mm thick. Longer spindles and screws are available on request for door thicknesses over 45mm.

The Exidor 296 is designed for single and double door applications. The unit is operated by a downward thrust of the cross bar to give a speedy exit in panic situations. An adapter for use with a rim cylinder for outside access is supplied as standard.

The Exidor 326 is a stylish knob operated outside access device that can be supplied with or without a 45mm single euro profile cylinder allowing flexibility where master keying is required. Built to the same profile as the 325 lever OAD the knob and lever are interchangeable.

The Exidor 293 is an elegant and highly functional panic bolt for single and double door applications. Incorporated as standard is an automatic top trip and easy clean floor socket. The main body is fitted with an antithrust device, which prevents leverage of both the top and bottom shoot bolts from their sockets.

The Exidor 294 is an elegant and highly functional panic bolt for single and double door applications. Incorporated as standard is an automatic top trip and easy clean floor socket. The main body is fitted with an antithrust device, which prevents leverage of both the top and bottom shoot bolts from their sockets.

Exidor panic set comprising of two single panic bolt units for use on plain meeting stile double doorsets. The unit is operated by pushing the bar down into the door face to retract the bolts, the bolts remain retracted until automatically released on closing of the door.

284A is supplied with adjustable shoot bolts for greater onsite flexibility. The push bar design can be easily cut to size to suit different door widths and is suited to most general-purpose non-rebated double door applications, often found in industrial applications.

Certified in compliance with EN 1125 with suitability for timber doors up to FD120 and metal doors FD120/FD240. Indicate the required finish when ordering.

Exidor emergency push pad shoot bolt for single doors, supplied with timber or steel door keeps and fixings.

The unit is operated by pushing the pad down into the door face to retract the bolts, the bolts remain retracted until automatically released on closing of the door.

Certified in compliance with EN 179 with suitability for timber doors up to FD120 and metal doors FD120/FD240.  Indicate the required finish when ordering.

Exidor push bar panic horizontal Pullman latch that is simple to install, supplied with timber or steel door keeps and fixings.

The unit is operated by pushing the pad down into the door face to retract the latch bolts, releasing the pad returns the latch bolts to the rest position.

Standard-size panic bolts are suitable for single doors up to 2440mm high. Special sizes are available on request.

Certified in compliance with EN 179 with suitability for timber doors up to FD120 and metal doors FD120/FD240. Indicate the required finish when ordering.

Exidor push bar panic vertical Pullman latch that is simple to install, supplied with timber or steel door keeps and fixings.

The unit is operated by pushing the pad down into the door face to retract the latch bolts, releasing the pad returns the latch bolts to the rest position.

Standard-size panic bolts are suitable for single doors up to 2440mm high. Special sizes are available on request.

Certified in compliance with EN 179 with suitability for timber doors up to FD120 and metal doors FD120/FD240.

Indicate the required finish when ordering.

Exidor 2-off push bar panic vertical Pullman latches for non-rebated double doorsets that is simple to install, and supplied with timber or steel door keeps and fixings.

The unit is operated by pushing the bar down into the door face to retract the latch bolts, releasing the bar returns the latch bolts to the rest position. Standard-size panic bolts are suitable for single doors up to 2440mm high. Special sizes are available on request.

Certified in compliance with EN 179 with suitability for timber doors up to FD120 and metal doors FD120/FD240. Indicate the required finish when ordering.

Exidor push bar panic bar set for rebated double doors comprising lath unit for active leaves and vertical Pullman latch for inactive leaves that is simple to install, supplied with timber or steel door keeps and fixings.

The unit is operated by pushing the bar down into the door face to retract the latch bolts, releasing the bar returns the latch bolts to the rest position.

Standard size panic bolts are suitable for single doors up to 1220mm wide and 2440mm high (special sizes are available on request).

Certified in compliance to EN 1125 with suitability for use on timber doors up to FD120 as well as metal doors FD120/FD240. Indicate required finish when ordering.

Exidor T-shaped knob outside access device for use with 200 series and 300 series hardware, for gaining entry through an escape door.

The unit is operated by rotating the knob to retract the internal bolts/latches, releasing the knob returns the internal bolts/latches to the rest position.

Available with or without a Euro cylinder. Key retention model available (Suffix order code with “RK” for key retention). Locking the cylinder prevents access into the building but will not prevent escape from the building.

Certified as an approved accessory to 200/300 series hardware as part of EN 1125 and EN 179.

 Indicate the required finish when ordering (plated finishes are not recommended for external use). Additional fixings for thicker doors are available on request.