It looks like you are visiting from a different region. Select your country or region for location-specific content.
Go to Ireland

302 knob outside access devices

Exidor round knob outside access device for use with 200 series and 300 series hardware, for gaining entry through an escape door. The unit is operated by rotating the knob to retract the internal bolts/latches, releasing the knob returns the internal bolts/latches to the rest position. Available with or without Euro/Oval cylinder. Key retention option available (Suffix order code with “RK” for key retention). Locking the cylinder prevents access into the building but will not prevent escape from the building. Certified as an approved accessory to 200/300 series hardware as part of EN 1125 and EN 179. Certifire approval when used as an accessory to the 200/300 series range. Indicate the required finish when ordering (plated finishes are not recommended for external use). Additional fixings for thicker doors are available on request.

Similar products

  • Exidor 296 panic latch

    The Exidor 296 is designed for single and double door applications. The unit is operated by a downward thrust of the cross bar to give a speedy exit in panic situations. An adapter for use with a rim cylinder for outside access is supplied as standard.

  • Exidor 305 mortice panic latch

    The Exidor 305 offers a push bar actuator unit with a cylinder mortice night latch case that can be supplied with or without a euro profile cylinder for access from the outside. A mortice plate is supplied as standard. The unit provides security on the outside with ease of escape from the inside in panic situations.

  • Exidor 293 push pad bolt

    The Exidor 293 is an elegant and highly functional panic bolt for single and double door applications. Incorporated as standard is an automatic top trip and easy clean floor socket. The main body is fitted with an antithrust device, which prevents leverage of both the top and bottom shoot bolts from their sockets.

  • Exidor 294 panic bolt

    The Exidor 294 is an elegant and highly functional panic bolt for single and double door applications. Incorporated as standard is an automatic top trip and easy clean floor socket. The main body is fitted with an antithrust device, which prevents leverage of both the top and bottom shoot bolts from their sockets.

  • 284 & 284A Non-rebated double doorset

    Exidor panic set comprising of two single panic bolt units for use on plain meeting stile double doorsets. The unit is operated by pushing the bar down into the door face to retract the bolts, the bolts remain retracted until automatically released on closing of the door.

    284A is supplied with adjustable shoot bolts for greater onsite flexibility. The push bar design can be easily cut to size to suit different door widths and is suited to most general-purpose non-rebated double door applications, often found in industrial applications.

    Certified in compliance with EN 1125 with suitability for timber doors up to FD120 and metal doors FD120/FD240. Indicate the required finish when ordering.

  • 285 Rebated Double Doorset

    Exidor double doorset for rebated double doors featuring a single point panic latch and two point panic bolt, supplied with either timber or metal door keeps and fixings. The unit is operated by pushing the bar down into the door face to retract the latch bolt on the active leaf or shoot bolts if opening the passive leaf.  On the passive leaf,  the shoot bolts remain retracted until automatically released on closing of the door. The push bar design can be easily cut to size to suit different door widths. 285A supplied with adjustable shoot bolts for greater onsite flexibility. Certified in compliance to EN 1125 with suitability for use on timber doors up to FD120 as well as metal doors up to FD240. 

  • 285A Rebated double doorset

    Exidor double doorset for rebated double doors featuring a single-point panic latch and two-point panic bolt, supplied with either timber or metal door keeps and fixings. The unit is operated by pushing the bar down into the door face to retract the bolts, the bolts remain retracted until automatically released on closing of the door. The push bar design can be easily cut to size to suit different door widths. 285A is supplied with adjustable shoot bolts for greater onsite flexibility. Certified in compliance with EN 1125 with suitability for timber doors up to FD120 and metal doors FD120/FD240. Indicate the required finish when ordering.

Need more help and support?

Download the specification manual

Unlock a wealth of valuable information with our Specification Manual. Available for immediate download, this comprehensive guide details product range, technical specifications, and industry-specific solutions. Prefer a physical copy? Click here to request our Specification Manual by post. 

Download now

Keep up-to-date with our latest insights

Our dedicated knowledge and news section is your go-to resource for the latest trends, innovations, and best practices in the door and hardware industry. From in-depth product information to expert analysis, we provide valuable knowledge to help you make informed decisions.

Visit knowledge centre

Need help? Get in touch

Fill out our quick contact form and a member of the team will be in touch to help you with your product and project requirements.