ES8100 V-lock
The new ES8100, also known as the V-lock, contains a high torque motorised bolt which moves into a V shaped Strike Plate, pulling the door into alignment, when locked.
The ES8100 incorporates many improvements over its predecessor, the ES8000, including a higher preload rating of 100kg, Door Position Monitoring, integrated LED lock status and diagnostics visual indication, increased door misalignment correction from 7mm to 12mm, an IP53 rating for external door applications and simple, one-step, PTO/PTL onsite configuration.
The ES8100 can be mounted either vertically or horizontally but cannot be mounted in the floor. The ES8100 V-lock can be mortice mounted and concealed from view or surface mounted, with the inclusion of an optional kit.
A slim design with classic satin stainless steel faceplate, makes the ES8100 a product with great aesthetic appearance and easy installation. Although completely redesigned internally, the new ES8100 V-lock body and faceplate retain the original ES8000 footprint. The ES8100 strike plate utilises the same fixing locations but is 3mm wider to increase misalignment distance (narrower retrofit version available for ES8000 strike plate replacements).
Similar products
MM15DT
The MM15DT is an extreme strength magnetic electromechanical lock with unique hybrid design. It has been designed with an 1,814kg extreme strength holding force that provides an unmatched level of security as well as a unique hybrid jaw design that includes two spring loaded, hardened steel jaws clamp down on the armature plate for ultimate holding power. It is ideal for mental healthcare and auxiliary detention facilities and other high-risk locations and is certified in compliance with EN 61000-6-1 and EN 61000-6-3.
1048 and 1049
The 1048 and 1049 electric cabinet locks can be fitted as a stand-alone lock controlled by a key switch, or a remotely operated control device that can lock or unlock multiple cabinets simultaneously. Designed to standard 32mm grid size for ease of fitting and suitable for both sliding drawers and hinged doors (with minimum 250mm distance from hinges to position of lock rosette). Versions with microswitch are available to monitor bolt status. 1048 snaps open when the door is unlocked, for cabinets with no external handle fitted. 1049 can be set up either fail safe or fail secure.
EL110
The EL110 is a compact, robust and cost-effective cabinet lock for swing or sliding cabinet doors. Designed to be surface mounted either vertically or horizontally, offering maximum flexibility for ease of installation. 5mm vertical / horizontal of flexible alignment adjustment after installation.
ES6000 Hook lock
The ES6000 is a heavy duty hook lock with high pre-load capability, for swinging and sliding doors, and can easily be attached to wooden or steel door frames.
GL1
The GL1 heavy duty electromechanical gate lock provides 907kg high strength holding force and weather-resistant access control, and is ideal for a wide range of gate applications. Designed with a self-aligning receiver that helps compensate for gate misalignment and sag. Tamper resistant cast housing for increased attack resistance. Accepts a standard mortice cylinder with Adams Rite MS cam for manual key override (not included, see spacer guide in dimensional image).