No, it always comes in stainless steel and satin chrome.
No, the door thickness must be 35–80 mm.
2 x CR2, 3V lithium batteries
Normally, the batteries last for several years or 30,000 cycles. If the LED flashes red instead of green after you enter the PIN code, it’s time to replace the batteries.
Nothing. If the door is locked, it remains locked. If the door is unlocked, it remains unlocked. The user codes are retained in the Code Handle memory.
You will first be warned by a red flashing LED when you enter the PIN code. If this warning is ignored, there will be a delay of 1–2 seconds after you enter the correct PIN code before the Code Handle is engaged and the door is unlocked.
No, it is only for use on interior doors.
Use a damp cloth or rag to wipe the Code Handle clean. Do not spray water directly onto the Code Handle.
Yes, enter administrator mode and press button 3 to turn the automatic lock on and off.
Yes, up to 9 user codes. However, only 1 administrator code is possible at a time.
You can add more users with your admin code.
Yes. Remove the Code Handle, tilt the handle pin vertically downwards, and press the numbers 1 and 4 at the same time.
The wrong code has been entered too many times. The Code Handle is probably disabled. Wait 3 minutes or enter the correct code twice to cancel the alarm.
The admin code is only used for configuration, not for opening. Please enter a user code to open the door.
