It looks like you are visiting from a different region. Select your country or region for location-specific content.
Go to Ireland

Electrified Exit Device

XD Series

Alarmed Exit Devices Description:

All XD Series Exit Devices can be converted into alarm devices. This feature is designed to deter, with the alarm, unauthorized use of the opening to warn someone who might open a controlled door the push bar is printed with.

Features:

  • Emergency Exit only 
  • Push To Open Alarm Will Sound
  • The alarm module is operated by a 9VDC battery
  • Type E - Monitors push bar, latch bolt and end cap
  • When the push bar is depressed or the latchbolt is retracted by the outside trim, the alarm will sound
  • Tampering with end cap will also trip alarm

Delayed Egress Exit Device Description:

The Delayed Egress Exit Device is designed to provide a controlled exit in a predetermined time delay. When the exit device is armed it will delay exit to any person for 15 to 30 (specify) seconds after the push pad is depressed for 3 or more seconds. Once the push pad is depressed for 3 or more seconds an alarm will sound that will alert appropriate people to respond to the signal and take immediate action. The alarm module also has a nuisance alarm feature in the event someone bumps or touches the push pad for less than 3 seconds.

Features:

  • The Delayed Egress Exit Device is furnished with a sticker in red letters which states Emergency Exit only push until alarm sounds door can be opened in 15 seconds
  • When the Delayed Egress Exit Device is in dearmed state it can be by-passed by turning the cylinder clockwise
  • This allows authorized personnel to exit without setting off the alarm
  • When the Delayed Egress Exit Device is in the state turning the cylinder counter clockwise temporarily release the device without setting off the alarm and will re-arm after 10 seconds
  • Device is ANSI A156.3 and ANSI A156.24

Consult local codes before specifying or supplying this solution.