eCLIQ

ASSA ABLOY^® eCLIQ is suitable for various industries.

• Schools
• City Councils
• Museums
• Art centres
• Nursing homes, smaller hospitals and health centres
• Commercial buildings and factories
• Transport and logistics
• Infrastructure
• Offices
• An application with a need for electronic access control in remote locations

Please contact one of our Distributors or ASSA ABLOY direct for more information.

Environmental restrictions for use

Use temperature: key 0°C …+70°C
Use temperature: cylinder -25°C …+85°C

Dust and water protection

Cylinder: IP classification IP 54 (=protected against dust and water splashed from all directions).
IP classification IP 55 (if dust covers are used) (=protected against dust and low pressure jets of water from all directions).
Padlock: IP classification IP 67 (= No dust can enter the key, and it is protected immersion).
Key: IP classification IP 67 (= No dust can enter the key, and it is protected immersion).

Time functions

eCLIQ keys have a clock and calendar feature.
An eCLIQ key can be programmed to be: always active, active between certain dates or inactive.
It is also possible to set a weekly operation schedule to the key. The calendar allows the administrator to specify up to 32 time periods where the key is granted access throughout the week. Cylinder specific time periods can be programmed in the key. The key can for instance be programmed to open all cylinders Mon - Fri 8AM - 5PM except for one (or more) cylinder(s) which can only be opened on Saturdays.

The clock has an accuracy of minimum +/- 1 minute per month.

Lifetime of the products

The expected lifetime of the electronic products is about seven years. After that the failure rate of any electronic products starts to grow due deterioration of electronic components and overall wear.

Specification Statement

The Keying System must use a symmetrical electronic key and electronic cylinder. The battery in the key must power up the cylinder upon key insertion.

Technical Information

CLIQ Key Material: The key shaft is made out of stainless steel. The key electronics and the battery are located under a plastic cover.

Active / Passive Key: Active (electronically)

Symmetrical / Asymmetrical Key: Symmetrical

CLIQ Key Indications: The key electronics contains a small buzzer and a LED that provides the key holder with a visual and audible access indication.

1 short beep and 1 short green light
The key is granted access

3 short beeps and 3 short red lights
No locking permissions or key outside the time zone

3 short beeps and 3 short red-green-red lights
Key outside the time zone

3 long beeps and 3 short green or red lights
The battery may be low or cold (try warming the key in your hand)

No beep
The battery is empty

CLIQ Key stampings
The key identification stampings are made on the metal of the key.

Speed of the electronic function
CLIQ cylinders can be operated 0.1 seconds after key insertion. An audible and visual indication is given to the key holder when the key can be turned.

CLIQ key battery
The battery powers the electronics in the key as well as in the cylinder.

The battery is located in the key bow under a plastic cover.

Battery specifications
Size ø 20 x 3.2 mm.
3 V lithium (type CR 2032).
Lifetime is about three years or 30,000 key operations.

The battery must be changed when the key starts to indicates a low battery warning. It is possible to make around 200 key operations before the battery is empty once the low battery warnings are given.