Standard panic and emergency hardware
Products
Filter
26 results
284 & 284A Non-rebated double doorset
Exidor panic set comprising of two single panic bolt units for use on plain meeting stile double doorsets. The unit is operated by pushing the bar down into the door face to retract the bolts, the bolts remain retracted until automatically released on closing of the door.
284A is supplied with adjustable shoot bolts for greater onsite flexibility. The push bar design can be easily cut to size to suit different door widths and is suited to most general-purpose non-rebated double door applications, often found in industrial applications.
Certified in compliance with EN 1125 with suitability for timber doors up to FD120 and metal doors FD120/FD240. Indicate the required finish when ordering.
285 Rebated Double Doorset
Exidor double doorset for rebated double doors featuring a single point panic latch and two point panic bolt, supplied with either timber or metal door keeps and fixings. The unit is operated by pushing the bar down into the door face to retract the latch bolt on the active leaf or shoot bolts if opening the passive leaf. On the passive leaf, the shoot bolts remain retracted until automatically released on closing of the door. The push bar design can be easily cut to size to suit different door widths. 285A supplied with adjustable shoot bolts for greater onsite flexibility. Certified in compliance to EN 1125 with suitability for use on timber doors up to FD120 as well as metal doors up to FD240.285A Rebated double doorset
Exidor double doorset for rebated double doors featuring a single-point panic latch and two-point panic bolt, supplied with either timber or metal door keeps and fixings. The unit is operated by pushing the bar down into the door face to retract the bolts, the bolts remain retracted until automatically released on closing of the door. The push bar design can be easily cut to size to suit different door widths. 285A is supplied with adjustable shoot bolts for greater onsite flexibility. Certified in compliance with EN 1125 with suitability for timber doors up to FD120 and metal doors FD120/FD240. Indicate the required finish when ordering.
293 & 293A Push pad bolt
Exidor emergency push pad shoot bolt for single doors, supplied with timber or steel door keeps and fixings.
The unit is operated by pushing the pad down into the door face to retract the bolts, the bolts remain retracted until automatically released on closing of the door.
Certified in compliance with EN 179 with suitability for timber doors up to FD120 and metal doors FD120/FD240. Indicate the required finish when ordering.
294 and 294A panic bolts
Exidor panic bolt with two-point vertical locking shoot bolts is an economical and versatile solution for many public area buildings. The unit is operated by pushing the bar down into the door face to retract the bolts, the bolts remain retracted until automatically released on closing of the door. Supplied with either timber or steel door keeps and fixings, some versions also have adjustable shoot bolts for greater onsite flexibility (294A only). Certified in compliance with EN 1125 with suitability for timber doors up to FD120 and metal doors FD120/FD240.
296 panic latches
Exidor single-point locking panic latch, designed for use with single and double door applications. The unit is operated by pushing the bar down into the door face to retract the latch, releasing the bar returns the latch to the rest position. The push bar design can be easily cut to size to suit different door widths and can be fitted with a lever or knob outside access device. Certified in compliance with EN 1125 with suitability for timber doors up to FD120 and FD120/FD240 metal doors. Indicate the required finish when ordering.
297 Push pad latch
Exidor emergency push pad latch that is simple to install, supplied with timber or steel door keeps and fixings.
The unit is operated by pushing the pad down into the door face to retract the latch, releasing the pad returns the latch to the rest position.
Certified in compliance with EN 179 with suitability for timber doors up to FD120 and metal doors FD120/FD240.
Indicate the required finish when ordering.
302 knob outside access devices
Exidor round knob outside access device for use with 200 series and 300 series hardware, for gaining entry through an escape door. The unit is operated by rotating the knob to retract the internal bolts/latches, releasing the knob returns the internal bolts/latches to the rest position. Available with or without Euro/Oval cylinder. Key retention option available (Suffix order code with “RK” for key retention). Locking the cylinder prevents access into the building but will not prevent escape from the building. Certified as an approved accessory to 200/300 series hardware as part of EN 1125 and EN 179. Certifire approval when used as an accessory to the 200/300 series range. Indicate the required finish when ordering (plated finishes are not recommended for external use). Additional fixings for thicker doors are available on request.
305 panic mortice actuator with cylinder mortice nightlatch
Exidor panic mortice actuator with cylinder mortice night latch, designed for use with single and double-door applications. Ideal for low-traffic doors in public areas requiring key entry only. The unit is operated by pushing the bar down into the door face to retract the latch, releasing the bar returns the latch to the rest position. Supplied with either timber or steel door keeps and fixing and certified in compliance with EN 1125. Indicate the required finish when ordering.
306 Push pad mortice actuator with cylinder nightlatch
Exidor emergency push pad with a mortice night latch, supplied with timber or steel door keeps and fixings.
The unit is operated by pushing the pad down into the door face to retract the mortice lock latch, releasing the pad returns the mortice lock latch to the rest position.
Ideal for restricted access areas requiring key entry as a mortice lock offers more protection against abuse on the internal face. Certified in compliance with EN 179. Indicate the required finish when ordering.
307 push pad with horizontal pullman latches
Experience effortless security with the Exidor 307 push pad featuring horizontal Pullman latches. Designed for smooth, reliable operation, this push pad combines durability with a sleek look, making it perfect for busy environments. Its user-friendly design ensures quick exit while maintaining safety, giving you peace of mind every time you use it.
308 single panic bolt with horizontal Pullman latches
Exidor push bar panic horizontal Pullman latch that is simple to install, supplied with timber or steel door keeps and fixings.
The unit is operated by pushing the pad down into the door face to retract the latch bolts, releasing the pad returns the latch bolts to the rest position.
Standard-size panic bolts are suitable for single doors up to 2440mm high. Special sizes are available on request.
Certified in compliance with EN 179 with suitability for timber doors up to FD120 and metal doors FD120/FD240. Indicate the required finish when ordering.